Repairs Decorative Box

Ornate Velvet Box of Nails

Cigar box is a very good raw material to make a stunning decorative box. To make this box, you need a cardboard cigar box, 50 cm velvet  with the color of your choice, glue, paint brushes, scissors, nail fungus and a hammer. Follow these steps :

- Measure and cut cloth material large enough to cover bottom and sides of the box, 

  add 3 inches to fold and close the open three edges of the box.

- Mixed the glue with a quarter of water. Apply glue to the outer layer and four-sided box with 

  a paint brush. Let the glue to dry and become sticky. Place the cloth material in the centre 

  pedestal and smooth from center to edge. Cover of the parties and 

  anti-aliased in the corner (Photo 1).

- Folding the cloth material at the corner angle and cut the rest (Photo 2).

- Apply glue to the edge of one side; wait for 2-3 minutes, then press cloth material along 

  the edge (Photo 3). Make sure to do the same with other two sides. 

  Do not put glue on the inside of cloth material.

(Photo 1, 2, 3)

- Cut the velvet at all edges and the folds in 
   (make sure you do the same for great ornate velvet box of nails).
- Cut a square velvet to be installed, and stick just outside the velvet hat. Cut the edge with 
   a knife.
- Press the cap into the nail fungus with copy my pattern or patterns according to your design. 
  Use the tip of the nail using hammer on the outside corner to the inside lid of cardboard 
  and do not hit it.
- You just finish your first ornate velvet box of nails.


Fur-lined box of birds

To make fur-lined box of birds, the material you need is a wooden box of cigars, 

25-30 grams of breast feathers of birds, all-purpose glue, brush, five round silver buttons. 

Follow these instructions :

- Apply glue to the narrow path of fluid from the underside. Follow the instructions on 

  the manufacture of velvet box above. Do not apply glue to a large area, 

  because the glue will dry before you have time to set up bird feathers.

- Arrange bird feathers on a narrow field, given by the glue. Arrange the feathers of birds in 

  the same direction, with the location at the top of each other.

- Put the bird feathers on the top the same way, starting from the corners to the Center. 

  Let the base was closed, because this section is not visible.

- Screw the round button in the dialog box based on four corners and the center 

  of the front cover.

- You just finish the Fur-lined box of birds.

To make this box, you need 25-30 grams of the chest feathers of birds.
With a pair of scissors cut the hair to remove the soft hair.

Apply glue and assemble the feathers on the box every time on one small area.
Put hair on top of each other and spread from the middle of the top box, on the edge of the base.

Plug the four buttons in the top corner and the middle of the front cover.
Legs and handles the ball-shaped lid of this box, but you can use the form.
Knop easily screwed by hand into the soft wood.

Box Sculpture Wall

A good way to take advantage of a gift box stuffed in your closet shelf or develop your creativity is to create a box sculpture wall . Grouping box in this way allows the creation of unlimited free-shaped sculpture, which will add to the colorful atmosphere in a modern room. Various sizes of boxes can be used in these creations. Starting from a matchbox to a large gift box. Boxes arranged upside down on top of each other at 1.3 cm thick wooden board. Board measures 60 x 90 cm, but can be chosen according to the size you want. However, maintaining the balance of the composition by arranging the big boxes in a vast place, and a small box placed on narrow place.


Materials needed :
- plywood or cardboard paper
- various kinds of box and lid
- spray paint of various colors
- glue


follow the instructions :
- Prepare a box with a variety of ways over the place of installation to get 
  the design you like. Some boxes can be mutually superimposed.
- Plan a color pattern and label each box with the first letter of the colors for 
  painted on its surface.
- Make a chart in order to benchmark your work.
- Spray the foundation board with white paint or whatever color you think will 
  provide a fascinating background to the color box.
- spray the outside of all boxes with paint and let it dry.
- put glue on the edge of the box that will form the first layer and press on the 
  board.
- attach another box on top of the first box. The Box sculputure wall 
  will be more interesting if some of the boxes attached to each 
  other only partially.

                    put glue on the edge of the box, pay attention not to leave traces of 

                                          glue out of the box if you intend to make art

                        Press box in place of the installation, note that only part of the trip in 
                       the box below. Use imaginative groupings, and avoid setting too symmetrical

                               This abstract wall hangings made of different kinds of box and lid.